Olivetti d-color MF651, Service Manual, Page: 682 / 1053

13. ENHANCED SECURITY Field Service Ver. 2.0 Jul. 2009
622
ADJUSTMENT
/ SETTING
13.3.5 IU Life Stop Setting
A. Use
• To select whether or not to stop a print cycle when the IU reaches its service life.
B. Procedure
• The default setting is Stop.
“Stop” No Stop
13.3.6 NVRAM Data Backup
A. Use
• To backup NVRAM data in the main body to the flash memory.
• To backup current data in order to prevent data in NVRAM from being erased unexpect-
edly.
• To backup data manually. It usually makes backup every hour automatically.
• Backup data can be restored by following the specified procedure when the trouble
(CD3XX) occurred.
Refer to “Troubleshooting” for details on restoration procedure.
See P.839
B. Procedure
1. Touch [NVRAM Data Backup].
2. Touch [Start] to start making a backup.
3. Check the message [Backup is completed.], and turn main power switch OFF. Wait for
ten seconds or more and turn main power switch back ON.
13.3.7 Operation Ban release time
A. Use
• To set the time that elapses before the machine releases an access lock that is activated
after the CE password authentication.
• To set the period of time that elapses before the machine releases the access lock,
which aims to prevent the unintentional release of the access lock.
• After the CE password authentication, if the access lock is activated, the lock release
timer starts to operate by input the Stop o 0 o 9 o 3 o 1 o 7 in [Meter Count] o
[Check Details] o [Coverage Rate] after the main power switch is turned OFF and On.
When the timer reaches the time specified in this setting, the access lock is released.
B. Procedure
• The default setting is 1 (minutes).
“1” to 60 (minutes)
NOTE
• When Enhanced Security Mode is set to ON in [Administrator Settings]
o
[Secu-
rity Settings] o [Enhanced Security Mode], the period of time that can be set in
this setting is 5 minutes or more.
Service Manual Y110571-1