Olivetti d-color MF651, Service Manual, Page: 673 / 1053

Field Service Ver. 2.0 Jul. 2009 12. SERVICE MODE
613
ADJUSTMENT
/ SETTING
12.16.20 Staple Option Setting
A. Use
• Specify the maximum number of sheets that can be stapled together.
• Only when FS-527 is installed, it is possible to independently set the maximum for each
paper type.
• To change the maximum that can be stapled together.
B. Procedure
<For FS-526>
Default setting: “100 Piece”. Large size staple limit restriction: “Do not do.”
Setting range: [2 to 100]. Large size staple limit restriction: [-20 pieces] or [Do not do.]
<For FS-527>
Default setting: Plain Paper “100 Piece”. Thick1 “30 Piece”. “22 Piece”.
Thick2 “22 Piece”. Large size staple limit restriction: “Do not do.”
Setting range: Plain Paper [2 to 50]. Thick1 [2 to 30]. [2 to 15]. Thaick2 [2 to 15].
Large size staple limit restriction: [-20 pieces] or [Do not do.]
1. Call the Service Mode to the screen.
2. Touch [Finisher]
o
[Staple Option Setting].
3. Enter a desirable maximum number with the 10-key pad.
4. Touch [END].
5. Touch [Exit] on the Service Mode screen.
6. Turn OFF the main power switch. Then, wait for 10 sec. or more and turn ON the main
power switch.
NOTE
• If mixed originals includes one or more large size ones (A3/11 x 17 or more), the
maximum that can be stapled together is subject to the setting of large size staple
limit restriction.
• If large size staple limit restriction is set to [-20 pieces] and the maximum number
of sheets to be stapled together less 20 is 2 or less, then the restricted number of
sheets as the maximum is 2.
• When FS-526 is installed and the staples for 50 sheets are detected, 50 sheets
becomes the upper limit even though the setting of the upper limit up to which
sheets can be stapled exceeds 50 sheets.
12.16.21 Punch Option Setting
A. Use
• Specifies punch settings depending on the optional punch kit attached to the finisher.
• An individual punch setting needs to be made according to the type of the punch option.
• This setting is necessary when ZU-606 is installed.
B. Procedure
1. Call the Service Mode to the screen.
2. Touch [Finisher]
o
[Punch Option Setting].
3. Touch [PK-516] or [PK-517].
4. Touch [2-Holes/3-Holes], [2-Holes/4-Holes], [EU4 holes] or [SWE4 holes].
5. When ZU-606 is installed, touch [ZU-606].
6. Touch [decision].
7. Touch [END].
8. Touch [Exit] on the Service Mode screen.
9. Turn OFF the main power switch. Then, wait for 10 sec. or more and turn ON the main
power switch.
Y110571-1 Service Manual