Olivetti d-color MF651, Service Manual, Page: 668 / 1053

12. SERVICE MODE Field Service Ver. 2.0 Jul. 2009
608
ADJUSTMENT
/ SETTING
12.16.15 FS-FN adjustment - Post Inserter Adjustment
A. Use
• To make automatic post inserter size detection adjustments separately in each of the
upper and lower trays.
• Make this adjustment at the time of setup or when the post inserter cannot make proper
size detection.
• Make this adjustment after performing PI displacement adjustment.
B. Procedure
1. Call the Service Mode to the screen.
2. Touch [Finisher]
o
[FS-FN adjustment]
o
[Post Inserter Adjustment].
3. Touch [Upper Tray].
4. Place A4S paper on the upper tray and touch [A4 ].
5. Touch Start key.
6. Confirm that the result is OK.
7. Touch [Lower Tray].
8. Place A4S paper on the lower tray and touch [A4 ].
9. Touch Start key.
10. Confirm that the result is OK.
11. Touch [OK] twice.
12. Touch [Exit] on the Service Mode screen.
13. Turn OFF the main power switch, wait for 10 sec., then turn the switch ON.
12.16.16 FS-FN adjustment - finisher check
A. Use
• Use this adjustment to check finisher's operation.
B. Procedure
1. Call the Service Mode to the screen.
2. Touch [Finisher] o [FS-FN adjustment] o [finisher check].
3. Touch [1], [2], [3], [4], [5] or [6] to select a mode.
4. Press the Start key to start finisher operation.
5. Press the Stop key to stop ongoing finisher operation.
Service Manual Y110571-1