Olivetti d-color MF651, Service Manual, Page: 637 / 1053

Field Service Ver. 2.0 Jul. 2009 12. SERVICE MODE
577
ADJUSTMENT
/ SETTING
12.12.13 Memory/HDD Adj.-HDD R/W Check
A. Use
• To check to see if the hard disk is connected properly, and if read/write operation of the
hard disk is correctly performed.
• When the hard disk is mounted.
B. Procedure
1. Call the Service Mode to the screen.
2. Touch these keys in this order: [State Confirmation]
o
[Memory / HDD Adj.]
o
[HDD R/
W Check].
3. Pressing the Start key will start the hard disk R/W check sequence and be terminated
automatically.
4. The check result will be displayed, [OK] or [NG].
12.12.14 Memory/HDD Adj.-HDD Format
A. Use
• To format the hard disk.
• The function proceeds in the order of physical format to logical format.
• If the hard disk is yet to be formatted, the malfunction code “C-D010” will appear. Ignore
this code and continue with the formatting procedure.
• When the hard disk is mounted.
• When the hard disk is to be initialized. (Physical format to logical format)
B. Procedure
1. Call the Service Mode to the screen.
2. Touch these keys in this order: [State Confirmation] o [Memory / HDD Adj.] o [HDD
Format].
Physical Format
1. Touch [Physical Format].
2. Press the Start key to start the formatting sequence.
3. The sequence will be automatically terminated as it is completed.
4. Turn off the main power switch and turn it on again more than 10 seconds after.
Logical Format (only when initial is set up)
1. Touch [Logical Format].
2. Press the Start key to start the formatting sequence.
3. The sequence will be automatically terminated as it is completed.
4. Turn off the main power switch and turn it on again more than 10 seconds after.
✽
Formatting the hard disk will erase all data contained in it.
12.12.15 Memory/HDD State
A. Use
• To display the condition and amount of the memory and hard disk.
B. Procedure
• When the encryption board is mounted, the machine automatically recognizes it and dis-
plays [Set].
Y110571-1 Service Manual