Olivetti d-color MF651, Service Manual, Page: 591 / 1053

Field Service Ver. 2.0 Jul. 2009 12. SERVICE MODE
531
ADJUSTMENT
/ SETTING
12.9 System 2
12.9.1 HDD
• Not used.
12.9.2 Image Controller Setting
A. Use
• To set the type of the controller.
• [Peripheral Mode] appears when [Others] is selected.
• When setting up the controller.
B. Procedure
Image Controller Setting
• Select the controller to be used.
“Controller 0” : The standard controller is used.
Controller 1
: The optional image controller IC-412 is used.
Controller 2 : undefined.
Controller 3 : undefined.
Others : undefined.
Peripheral Mode
• Select the operating mode of the Scanner.
Mode 1: undefined.
Mode 2: undefined.
Mode 3: undefined.
NOTE
• When the following setting is “ON”, this setting should be set to “Controller 0”.
[Administrator Settings] o [Security Settings] o [Enhanced Security Mode] When
[Enhanced Security Mode] is set to “ON”, this setting cannot be changed.
• After changing setting, make sure to turn off the main power switch and turn it on
again more than 10 seconds after.
Note on returning the setting from “Controller 1” to “Controller 0”.
• Selecting “Controller 0” will initialize the following settings made while “Controller 1” was
selected. Reset the following items as necessary when using the internal standard con-
troller.
<Control panel on the machine>
• Setting items included in [Network Setting] available from [Administrator Setting].
(Except [Status Notification Setting] and [Prefix/Suffix Setting] available from the follow-
ing setting. [Administrator Settings]
o [Network Settings] o [Detail Settings].)
• The following setting
[Administrator Settings]
o
[User Authentication /Account Track]
o
[General Settings]
o
[External Server]
• The following setting
[Administrator Settings] o [System Connection] o [OpenAPI Setting]
• Mailbox Destination (scan)
• Information on the original specified by the program destination
<Page Scope Web Connection>
• SSL/TLS
Y110571-1 Service Manual