Olivetti d-color MF651, Service Manual, Page: 535 / 1053

Field Service Ver. 2.0 Jul. 2009 12. SERVICE MODE
475
ADJUSTMENT
/ SETTING
12.4.15 Printer Resist Loop
A. Use
• To set the correction value of the paper loop length for each process speed of tray 1 to
tray 4, LCT, bypass, and duplex.
• To adjust the length of the loop formed in paper before the registration rollers.
• Use “Paper Passage” for paper passage check.
• When a paper skew occurs.
• When a paper misfeed occurs.
B. Procedure
• The adjustable range is different depending on paper source and processing speed.
<
d-Color MF
65
1
>
<
d-Color MF
55
1
>
<
d-Color MF
45
1
>
1. Call the Service Mode to the screen.
2. Touch these keys in this order: [Machine] o [Printer Resist Loop].
3. Select a paper source and a processing speed where the settings are made by touch-
ing the corresponding keys.
4. Enter the new setting from the 10-key pad.
To decrease the loop amount: Increase the setting value
To increase the loop amount: Decrease the setting value
Tray 1/2 Tray 3/4 LCT Manual Duplex
310 mm/sec -5 to +5

-5 to +5 -5 to +5
240 mm/sec -5 to +5  -5 to +5 -5 to +5
155 mm/sec -9 to +9

-9 to +9 -9 to +9
120 mm/sec -10 to +10  -10 to +10 -10 to +10
420 mm/sec

0 to +3
 
216 mm/sec  -5 to +5  
Tray 1/2 Tray 3/4 LCT Manual Duplex
264 mm/sec -5 to +5  -5 to +5 -5 to +5
216 mm/sec -5 to +5 -5 to +5 -5 to +5 -5 to +5
132 mm/sec -9 to +9  -9 to +9 -9 to +9
108 mm/sec -10 to +10

-10 to +10 -10 to +10
350 mm/sec

-3 to +3
 
Tray 1/2 Tray 3/4 LCT Manual Duplex
216 mm/sec -5 to +5 -5 to +5 -5 to +5 -5 to +5
132 mm/sec -9 to +9  -9 to +9 -9 to +9
108 mm/sec -10 to +10

-10 to +10 -10 to +10
350 mm/sec  -3 to +3  
Y110571-1 Service Manual