manualshive.com logo in svg

Olivetti d-color MF651, Service Manual, Page: 524 / 1053

Share
Download
Olivetti d-color MF651 Service Manual Download Page 524

12. SERVICE MODE

Field Service Ver. 2.0 Jul. 2009

464

ADJUSTMENT

 / SETTING

12.4.4

Org. Size Detecting Sensor Adj.

A. Use

• To automatically adjust the original detection distance for the original size detection sen-

sor/1.

• To display if the original size detection sensor/2 is mounted.
• When the sensor is replaced with a new one.
• When an optional sensor has been added.
• When an erroneous original size detection is made.
• When the marketing area setting is changed.

B. Procedure

1.

Place a blank sheet of A3 or 11 x 17 paper on the original glass and lower the original 
cover.

2.

Call the Service Mode to the screen.

3.

Touch these keys in this order: [Machine] 

o

 [Org. Size Detecting Sensor Adj.].

4.

Press the Start key.

If the adjustment has been successfully made, it completes the adjustment procedure.
If the adjustment has turned out to be unsuccessful, check the optional original size sen-
sors for correct installation and change the defective sensor or harness.

Service Manual                                           Y110571-1

Summary of Contents for d-color MF651






























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments