Olivetti d-color MF651, Service Manual, Page: 518 / 1053

12. SERVICE MODE Field Service Ver. 2.0 Jul. 2009
458
ADJUSTMENT
/ SETTING
*1: It will be displayed only when the optional fax kit (FK-502) line 1 is mounted.
*2: It will be displayed only when the optional fax kit (FK-502) line 2 is mounted.
*3: It will be displayed only when the optional finisher (FS-526 or FS-527) is mounted.
*4: It will be displayed only when the optional saddle stitcher (SD-508) is mounted.
*5: It will be displayed only when the optional saddle stitcher (SD-509) is mounted.
*6: It will be displayed only when the optional post inserter (PI-505) is mounted.
*7: It will be displayed only when the optional Z folding unit (ZU-606) is mounted.
*8: It will be displayed only when the optional job separator (JS-504) is mounted.
*9: It will be displayed only when the optional punch kit (PK-516) is mounted.
*10: It will be displayed only when the optional punch kit (PK-516 or PK-517) is mounted.
*11: It will be displayed only when the [Internet ISW Set] is set to “ON.”
Finisher *3 FS-FN adjustment *3 Center Staple Position *3 P.597
Half-Fold Position *4 *5 P.598
Punch Vertical Position *9 P.599
Punch Horizontal Position *10 P.600
Punch edge detection *9 P.601
Punch vertical position (Z-fold) *7 P.602
Punch horizontal position (Z-fold) *7 P.603
Punch regist adj. (Z-fold) *7 P.603
Punch Resist Loop Size (Body) *10 P.604
Punch Resist Loop Size (PI) *6 *9 P.604
1st Z-Fold position *7 P.605
2nd Z-Fold position *7
Tri-Fold Position *4 P.606
Center-staple pitch adjustment *4 *5 P.607
PI Size Detection *6 P.607
Post Inserter Adjustment *6 P.608
finisher check *3 P.608
Load Data *3 P.611
Side position adjustment *4 *5 P.612
Punch unit edge detection *7 P.612
Staple option setting P.613
Punch Option setting P.613
Fold power of pages restrict. P.614
Job Separator *8 P.614
Internet ISW Internet ISW Set P.615
HTTP Setting *11 P.615
FTP Setting *11 P.616
Forwarding Access Setting *11 P.617
Download *11 P.618
Service Mode Ref. Page
Service Manual Y110571-1