Olivetti d-color MF651, Service Manual, Page: 507 / 1053

Field Service Ver. 2.0 Jul. 2009 10. UTILITY
447
ADJUSTMENT
/ SETTING
10.6.91 Security Settings-Image Log Transfer Settings
• It will be displayed when the following setting shows that switch No.63 is set to [01] at
HEX assignment.
[Service Mode]
o
[System 2]
o
[Software Switch Setting]
A. Use
• Specifies whether to transfer the input or output image data to the server using whenever
MFP inputs or outputs image data.
Makes the settings of the WebDAV server or the FTP server where image data are trans-
ferred.
• Use this settings to keep logs of input and output image data for security purpose.
B. Procedure
• The each default setting is No.
Yes “No”
• When selecting [Yes], make the settings of the server where data are transferred.
• Set the following item.
<WebDAV Server setting>
• Host Name, File Path, User Name, Password, Port Number, Proxy, SSL Setting.
<FTP Server setting>
• Host Name, File Path, User Name, Password, Port Number, PASV, and Proxy.
10.6.92 Security Settings-Driver Password Encryption Setting
A. Use
• To set whether to use the factory default encryption word or user-defined one as a com-
mon key that encrypts a password used for a print job.
User-Defined : Sets an encryption word. Enter an encryption word of 20 letters.
Use Factory Default: Uses the factory default encryption word (undisclosed predefined
encryption key).
NOTE
• When selecting [User-Defined], set an encryption key being consisted of the same
letters in the printer driver. If the encryption word set in the main body differs from
the encryption key set in the printer driver, different encrypted passwords are cre-
ated and printing cannot be made.
• The use of OpenAPI allows an encryption key to be obtained from the main body.
B. Procedure
• The default setting is Use Factory Default.
User-Defined “Use Factory Default”
Y110571-1 Service Manual