Olivetti d-color MF651, Service Manual, Page: 495 / 1053

Field Service Ver. 2.0 Jul. 2009 10. UTILITY
435
ADJUSTMENT
/ SETTING
(2) Procedure
• The default setting is OFF.
ON “OFF”
NOTE
• [OFF] cannot be selected when the following setting is set to “ON.”
[Administrator Settings] o [Security Settings] o [Enhances Security Mode]
• [ON] cannot be selected when the following setting is set to “OFF.”
[Service Mode]
o
[Enhanced Security]
o
[CE Authentication]
[CE Authentication] will not be displayed and cannot be set to “OFF” when [Pass-
word Rules] is set to “ON.”
B. Prohibited Functions When Authentication Error
(1) Use
• To set the function for prohibiting authentication operation in order to prevent the unau-
thorized access.
• To use when setting the system to prohibit authentication failure when conducting
authentication by password, etc.
• Authentications which are subjected to this function: CE authentication, administrator
authentication, user+ accounts authentication, SNMP authentication, secure print
authentication, user box authentication.
Mode 1 : When failed to authenticate, authentication operation (entering the password)
will be prohibited for a certain period of time.
Mode 2 : When failed to authenticate, authentication operation (entering the password)
will be prohibited for a certain period of time.
The number of times failure occurred will be counted, and when the number
reaches to the specified time, authentication will be prohibited and the access
will be locked.
When the access is locked, touch [Release] on the main body, or turn main
power switch OFF/ON to cancel it.
For CE authentication and administrator authentication, only turning main
power switch OFF/ON will cancel it.
When the machine goes into an access lock condition, release the lock in the
following procedure.
User+ accounts authentication
SNMP authentication
Secure print authentication
User box authentication • Touch keys in the following order. [Administrator Settings] o
[Security Setting]
o
[Security Details]
o
[Prohibited Func-
tions When Authentication Error].
Then touch [Release].
Administrator authentication
• After the main power switch is turned OFF and ON, the
access lock is released automatically after the lapse of a pre-
determined period of time.
• [Service Mode]
o
[Enhanced Security]
o
[Administrator
unlocking]
CE authentication
• The lock release timer starts to operate by input the Stop o
0
o
9
o
3
o
1
o
7 in [Meter Count]
o
[Check Details]
o
[Coverage Rate] after the main power switch is turned OFF
and On. When the timer reaches the time specified in this
setting, the access lock is released.
Y110571-1 Service Manual