Olivetti d-color MF651, Service Manual, Page: 480 / 1053

10. UTILITY Field Service Ver. 2.0 Jul. 2009
420
ADJUSTMENT
/ SETTING
C. Closed Network RX
• It will be displayed when the following setting is set to “ON.”
[Service Mode] o [FAX] o [System] o [Display Setting] o [Closed area RX]
(1) Use
• To set whether to use the closed network function.
• To receive data only from the device which password matches.
(2) Procedure
• The default setting is OFF.
• When set to [ON], enter the password (up to 4 digits) to be used.
D. Forward TX Setting
• It will not be displayed when [PC-FAX RX Setting], [Memory RX] or [TSI User Box Set-
ting] is set to “ON.”
• It will not be displayed when the following setting shows that Vendor or Authentication
Device is mounted.
[Service Mode]
o [Billing Setting] o [Management Function Choice]
(1) Use
• To set whether to use the forward fax function.
• To forward the received text to the receiver which has been specified.
Forward & Print : Forward the received text, and print all out
Forward & Print (If TX Fails) : Forward the received text, and prints out only when fails
to be forwarded
(2) Procedure
<Forward TX Setting>
• The default setting is No.
• When set to [Yes], set the address to forward to.
E. Incomplete TX Hold
• It will be displayed when the following setting is set to “ON.”
[Service Mode]
o
[FAX]
o
[System]
o
[Display Setting]
o
[Re-Transmission]
• It will not be displayed when the following setting shows that Management Device 2 is
mounted.
[Service Mode]
o [Billing Setting] o [Management Function Choice]
(1) Use
• To set whether to use incomplete TX hold function.
• To re-send the data failed to be sent after a given time.
(2) Procedure
• The default setting is No.
Yes “No”
• When set to Yes, specify the Incomplete TX Hold Time.
Service Manual Y110571-1