Olivetti d-color MF651, Service Manual, Page: 424 / 1053

10. UTILITY Field Service Ver. 2.0 Jul. 2009
364
ADJUSTMENT
/ SETTING
C. Apply Levels/Groups to Users
(1) Use
• Sets Apply Level or Apply Group for individual users.
(2) Procedure
1. Select a registered user. Touch [Apply Group] and [Apply Level] independently to make
each settings.
10.6.32 User Authentication/Account Track-Authentication Device Settings
• The function can be displayed only when the authentication device 2 is set to Set by
[Service Mode]
o
[Billing Setting]
o
[Management Function Choice]
A. General Settings
(1) Use
• Specifies a device used for user authentication.
Card Authentication : Select the IC card type and operation settings.
Bio Authentication
: Select the beep and operation settings.
(2) Procedure
Card Authentication Bio Authentication
• Select either one of the authentication devices and press the corresponding key to go to
the individual operation setting screen.
• The screen displays the authentication device that is selected in [Service Mode] o [Bill-
ing Setting] o [Management Function Choice] o [Authentication Device 2].
When [Card 1] is selected as the authentication device, select the card type from among
[FeliCa], [TypeA], [SSFC], [FCF], and [FCF (Campus)] and make the operation settings.
When [Card 2] is selected as authentication device, the authentication device name will
be displayed differently depending on the type of installed loadable device driver.
• If SSFC (Shared Security Formats Cooperation) is selected in Card Authentication, set
[Company Code], [Company Identification Code], [Area No.], [Building No.], [Floor No.],
[Room No.], and [Security Level].
• If LEGIC (PID) is selected in Card Authentication, perform the access setting (STAMP
input) for LEGIC (PID).
• If MIFARE (PID) is selected in Card Authentication, perform the MIFARE key setting.
Service Manual Y110571-1