manualshive.com logo in svg

Olivetti d-color MF651, Service Manual, Page: 416 / 1053

Share
Download
Olivetti d-color MF651 Service Manual Download Page 416

10. UTILITY

Field Service Ver. 2.0 Jul. 2009

356

ADJUSTMENT

 / SETTING

10.6.23

One-Touch/User Box Registration-One-Touch/User Box Registration List

A. Address Book List
(1) Use

• To output the address book list.

(2) Procedure

1.

Select the destination type to be output.

2.

Touch [Starting destination No.] and enter the number from which output starts.

3.

Touch [No. of Destinations] and specify the number of destinations to be output.

4.

Touch [Print], and select the paper feed tray.

5.

Select the simplex or duplex print, and press the Start key to output the list of abbrevi-
ated addresses.

B. Group List
(1) Use

• To output the group list.

(2) Procedure

1.

Touch [Starting destination No.] and enter the number from which output starts.

2.

Touch [No. of Destinations] and specify the number of destinations to be output.

3.

Touch [Print], and select the paper feed tray.

4.

Select the simplex or duplex print, and press the Start key to output the list of abbrevi-
ated addresses.

C. Program List
(1) Use

• To  output the program list.

(2) Procedure

1.

Select the destination type to be output.

2.

Touch [Starting destination No.] and enter the number from which output starts.

3.

Touch [No. of Destinations] and specify the number of destinations to be output.

4.

Touch [Print], and select the paper feed tray.

5.

Select the simplex or duplex print, and press the Start key to output the list of abbrevi-
ated addresses.

D. E-mail Subject/Text List
(1) Use

• To output the subject or the text list.

(2) Procedure

1.

Select the paper feed tray.

2.

Select the simplex or duplex print, and press the Start key to output the list of abbrevi-
ated addresses.

Service Manual                                           Y110571-1

Summary of Contents for d-color MF651






























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments