Olivetti d-color MF651, Service Manual, Page: 406 / 1053

10. UTILITY Field Service Ver. 2.0 Jul. 2009
346
ADJUSTMENT
/ SETTING
C. Meter Counter List
• Setting will be available only when the following setting shows that either authentication
device, management device 2, vendor 2 is mounted.
[Service Mode]
o [Billing Setting] o [Management Function Choice]
<Use>
• To output the meter counter list.
• To print out the list in this setting because counter list cannot be printed when the follow-
ing setting shows that vendor is mounted.
[Meter Counter]
o [Details]
<Procedure>
1. Touch [Meter Counter List].
2. Select the Feed tray.
3. Select Simplex or Duplex print, and touch the Start key.
D. Check Consumables List
• Setting will be available only when the following setting shows that either authentication
device, management device 2, vendor 2 is mounted.
[Service Mode]
o
[Billing Setting]
o
[Management Function Choice]
<Use>
• To output the consumable life list.
• To print out the list in this setting because the list cannot be printed when the following
setting shows that Vendor is mounted.
[Utility]
o
[Check Consumable Life]
<Procedure>
1. Touch [Consumable Life List].
2. Select the feed tray.
3. Select Simplex or Duplex print, and touch the Start key.
10.6.9 System Settings-Reset Settings
A. System Auto Reset
(1) Use
• To set the period of time until system auto reset starts functioning.
(2) Procedure
<Priority Mode>
• To set the functions displayed during system auto reset from Copy and Scan/Fax.
• The default setting is Copy.
“Copy” Scan/Fax
<System Auto Reset Time>
• The default setting is 1 min.
“1 min.” (1 to 9, OFF)
Service Manual Y110571-1