Olivetti d-color MF651, Service Manual, Page: 387 / 1053

Field Service Ver. 2.0 Jul. 2009 10. UTILITY
327
ADJUSTMENT
/ SETTING
(11) Punch Unit Size Detect Sensor
<Use>
• To adjust sensitivity (light intensity) of the paper size detect board (PSDTB) of the punch
unit of ZU.
• Make the adjustment upon setup of ZU-606.
<Procedure>
1. Call the Administrator Settings to the screen.
2. Touch [System Settings]
o
[Expert Adjustment]
o
[Finisher Adjustment]
o
[Punch
Unit Size Detect Sensor].
3. Touch Start key.
4. Confirm that the result is OK.
NOTE
• When NG appears, check whether the punch unit is properly installed.
5. Touch [OK].
(12) Post Inserter Tray Size Adjustment
<Use>
• To make automatic post inserter size detection adjustments separately in each of the
upper and lower trays.
• Make this adjustment at the time of setup or when the post inserter cannot make proper
size detection.
• Make this adjustment after performing PI displacement adjustment.
<Procedure>
1. Call the Administrator Settings to the screen.
2. Touch [System Settings]
o
[Expert Adjustment]
o
[Finisher Adjustment]
o
[Post
Inserter Tray Size Adjustment].
3. Touch [Upper Tray].
4. Place A4S paper on the upper tray and touch [A4 ].
5. Touch Start key.
6. Confirm that the result is OK.
7. Touch [Lower Tray].
8. Place A4S paper on the lower tray and touch [A4 ].
9. Touch Start key.
10. Confirm that the result is OK.
11. Touch [OK].
Y110571-1 Service Manual