Olivetti d-color MF651, Service Manual, Page: 378 / 1053

10. UTILITY Field Service Ver. 2.0 Jul. 2009
318
ADJUSTMENT
/ SETTING
C. Finisher Adjustment
(1) Center Staple Position
<Use>
• Adjust the stapling position for each paper size when printing with the center staple func-
tion.
• Adjust the stapling position for each paper size when printing with the center staple func-
tion.
<Procedure>
NOTE
• After half-fold position adjustment, make this center staple position adjustment.
1. Place five sheets of originals on the ADF.
2. Make a set of copy in the saddle stitching mode.
3. Check the amount of horizontal deviation (A) between the staple and the half fold posi-
tions on the set of copy.
Specification A: 0 ± 1.0 mm
Adjustment range: -10.0 mm to +10.0 mm (1 step: 0.1 mm)
4. If (A) is out of the specified range, make the following adjustment.
5. Call the Administrator Settings to the screen.
6. Touch [System Settings]
o
[Expert Adjustment]
o
[Finisher Adjustment]
o
[Center
Staple Position].
7. Touch the paper size where staple position is adjusted.
8. Look at the copy and adjust the staple position with the [+]/[-] key.
9. Touch [OK].
10. Make another set of copy sample and check the amount of deviation (A).
A11PF3C500DA
A
A11PF3C501DA
Service Manual Y110571-1