Field Service Ver. 2.0 Jul. 2009
10. UTILITY
313
ADJUSTMENT
/ SETTING
(3) Leading Edge Adjustment (Duplex Side 2)
• It will not be displayed when the following setting shows that Management Device 1 is
mounted during the device power is OFF or no authentication is set.
[Service Mode]
o
[Billing Setting]
o
[Management Function Choice]
• This menu is unavailable when the key counter is not inserted while only the key counter
is set to Set by [Service Mode]
o
[Billing Setting]
o
[Management Function Choice].
<Use>
• Makes an adjustment by changing the image write start position in the sub scan direction
on the 2nd side of duplex printing for individual types of paper.
• When the 2nd side image on paper fed from the tray is shifted in the sub scan direction.
• Able to make an individual adjustment for each paper type of plain paper, thick 1/1+, thick
2 and thick 3.
<Procedure>
• Width A on the test print produced should fall within the following range.
• For measurement, use the image produced on the backside of the test print.
Specifications: 4.2
r
0.5 mm
Setting range: -3.0 mm to +3.0 mm (in 0.2 mm increments)
1.
Call the Administrator Settings to the screen.
2.
Touch [System Settings]
o
[Expert Adjustment]
o
[Printer Adjustment]
o
[Leading
Edge Adjustment (Duplex side 2)].
3.
Select the [Normal].
4.
Press the Start key to let the machine produce a test print.
5.
Check the dimension of width A on the test print.
6.
If width A falls outside the specified range, change the setting using the [+] / [-] key.
If width A is longer than the specifications, make the setting value smaller than the cur-
rent one.
If width A is shorter than the specifications, make the setting value greater than the cur-
rent one.
7.
Press the Start key to let the machine produce a test print.
8.
Check the dimension of width A on the test print
9.
If width A is outside the specified range, change the setting again and make a check
again.
10.
If width A falls within the specified range, touch [OK].
11.
Following the same procedure, adjust for thick 1 to 3, OHP, and envelope.
A0P0F3C503DA
Width A
Backside
Y110571-1 Service Manual
Summary of Contents for d-color MF651
Page 1: ...d Color MF651 d Color MF551 d Color MF451 Color Printer SERVICE MANUAL Code Y110571 1...
Page 24: ...MEASURES TO TAKE IN CASE OF AN ACCIDENT S 22 Blank Page...
Page 27: ...d Color MF651 d Color MF551 d Color MF451 Color Printer SERVICE MANUAL Code Y110571 1...
Page 1053: ...UPDATING STATUS DATE UPDATED PAGES PAGES CODE 10 2009 1ST EDITION 1053053 Y110571 1...