Olivetti d-color MF651, Service Manual, Page: 354 / 1053

10. UTILITY Field Service Ver. 2.0 Jul. 2009
294
ADJUSTMENT
/ SETTING
F. Banner Sheet Setting
(1) Use
• To set whether or not to print on the banner (front cover) page.
(2) Procedure
• The default setting is OFF.
ON “OFF”
G. Binding Direction Adjustment
(1) Use
• Specifies the alignment between the sides of paper (binding position adjustment) in
duplex printing.
• To achieve faster printing performance, select Productivity Priority. To address misalign-
ment problems between sides of copies in the horizontal and vertical directions, select
Finishing Priority.
Finishing Priority : Able to optimize sides aligning operation as the process is per-
formed after the machine receives all of the print data.
Productivity Priority : Able to accelerate print speed as sides alignment proceeds
together with data reception and print operation.
Control Adjustments : Comply with the command from the printer driver and does not
take the side alignment step.
(2) Procedure
• The default setting is Finishing Priority.
“Finishing Priority” Productivity Priority Control Adjustments
H. Line Width Adjustment
(1) Use
• To correct line width of the output data during PC print.
(2) Procedure
• The default setting is Thin.
“Thin” Normal Thick
I. Gray Background Text Correction
(1) Use
• Letters or lines on a gray background may look thicker than those on a non-gray back-
ground.
ON : Makes characters and lines on a grayscale background thicker and sharpens
the outlines of characters and figures
OFF : Makes grayscale background text correction by selecting Thin, Normal, or Thick
in [Line Width Adjustment]. If selecting “ON” makes lines too thick, select “OFF.”
(2) Procedure
• The default setting is ON
“ON” OFF
Service Manual Y110571-1