Olivetti d-color MF651, Service Manual, Page: 343 / 1053

Field Service Ver. 2.0 Jul. 2009 10. UTILITY
283
ADJUSTMENT
/ SETTING
10.5.15 Custom Display Settings-Copy Screen
• It will not be displayed when the following setting shows that key counter, vendor, or
authentication device 1 is mounted.
[Service Mode]
o
[Billing Setting]
o
[Management Function Choice]
However, this menu is available when the key counter is installed and [The next job reser-
vation] is set to License.
[Service Mode]
o
[Billing Setting]
o
[Management Function Choice]
A. Copy Operating Screen
(1) Use
• To set the display on the control panel screen during printing.
Yes : The screen shows that the printing is being carried out. The job can be reserved
with [Program Next Job].
No : The screen does not indicate the printing being carried out. The normal copy set-
ting screen will be displayed. The copy reservation is available.
(2)
• The default setting is No.
Yes “No”
10.5.16 Custom Display Settings-Fax Active Screen
• It will be displayed only when the optional fax kit (FK-502) is mounted.
• It will not be displayed when the following setting shows that key counter, vendor, or
authentication device 1 is mounted.
[Service Mode]
o
[Billing Setting]
o
[Management Function Choice]
A. TX Display
(1) Use
• To set the screen display for the control panel when transmitting fax.
(2) Procedure
• The default setting is No.
Yes “No”
B. RX Display
(1) Use
• To set the screen display on the control panel when receiving fax.
(2) Procedure
• The default setting is No.
Yes “No”
10.5.17 Custom Display Settings-Color Selection Settings
A. Use
• Specifies a color that highlights a selection on the control panel.
B. Procedure
• The default setting is Green.
“Green” Blue Yellow Pumpkin
Y110571-1 Service Manual