Olivetti d-COLOR MF3800, Manual

Page: 51 / 82

d-Color MF 3300/3800 5-5
5.3 Using the DRPD service 5
5.3 Using the DRPD service
DRPD
If the DRPD (Distinctive Ring Pattern Detection) service is used, fax reception starts automatically when the
call signal of the selected pattern is received.
NOTICE
If DRPD is set by mistake in a region where the DRPD service is not available, it will result in a fax receiving
failure.
Operations required to use this function (for administrators)
To use DRPD, the following settings are required.
-
Set [Utility]-[Administrator Settings]-[Fax Settings]-[Line Parameter Setting]-[RX Mode ]to [Auto RX] (de-
fault: [Auto RX]).
-
Select [Utility] - [Administrator Settings] - [Fax Settings] - [Line Parameter Setting] - [Ring Pattern], then
specify the ring pattern to receive a fax (default: [Normal Ring]).