Olivetti d-COLOR MF283, Quick Manual

Page: 97 / 190

d-COLOR MF283/MF223 3-21
3.2 Scan-to-Send function 3
3.2.3 Sending data to your Mac computer (SMB Send)
Send scanned data to a computer on the network.
Once settings are configured, you can send data easily.
Preparation flow
The following describes a preparation flow for sending scanned data. For details, refer to the relevant page.
This preparation is not required the second time or subsequent times.
1
Checking the cable connection (Administrator)
%
Check that this machine is correctly connected to the network cable. For details, refer to page 3-22.
2
Checking network settings of this machine (Administrator)
%
Check the network settings of this machine. For details, refer to page 3-22.
3
Checking computer information
% Check the information required for Store Address, and fill out the checklist. For details, refer to
page 3-24.
4
Configuring your computer
%
Configure settings to share a computer, or create a dedicated folder to receive files. For details, refer
to page 3-25.
5
Registering destinations
%
Register destinations to which files are sent while checking the checklist. For details, refer to
page 3-25.