Olivetti d-COLOR MF283, Quick Manual

Page: 90 / 190

3-14 d-COLOR MF283/MF223
Scan-to-Send function 3 3.2
Operation flow
The following describes a transmission flow. For details, refer to page 3-19.
1
Loading the original
2
Selecting a destination
% Select a registered destination, and check the settings such as the file type and image quality.
3
Press the Start key.
% Press the Start key to scan the original.
Checking the cable connection
Check that a LAN cable is connected to the LAN port of this ma-
chine and the green LED is on.
Checking network settings of this machine
Tap [Utility], and select [Device Information]. Then, check that the IP address is displayed.
Tips
- In general, the default settings are available for network connection; however, some network environ-
ments require a change on network settings.
- If no IP address is displayed, you need to configure the network. Tap [Utility], and select [Administrator
Settings] - [Network Settings] - [TCP/IP Settings]. Configure the required settings to suit your environ-
ment. For details, refer to the User's Guide DVD.
• For IPv4 environment • For IPv6 environment