Olivetti d-Color MF2613En, Service Manual

Page: 164 / 375

2PV/2PW
1-4-28
1-4-3 Image formation problems
If the part causing the problem was not supplied, use the unit including the part for replacement.
(1) No image
appears (entirely
white).
(2) No image
appears (entirely
black).
(3) A specific color
is printed solid.
(4) The back side
gets dirty.
(5) Image is too
light.
See page 1-4-29 See page 1-4-29 See page 1-4-30 See page 1-4-30 See page 1-4-30
(6) The back-
ground is col-
ored.
(7) White streaks
are printed verti-
cally.
(8) Black streaks
are printed verti-
cally.
(9) Streaks are
printed horizon-
tally.
(10)Spots are
printed.
See page 1-4-31 See page 1-4-31 See page 1-4-31 See page 1-4-32 See page 1-4-32
(11) The leading
edge of image
begins to print
too early or too
late.
(12)Paper is wrin-
kled.
(13)Offset occurs. (14)Part of image is
missing.
(15)Fusing is loose.
See page 1-4-32 See page 1-4-32 See page 1-4-33 See page 1-4-33 See page 1-4-33
(16)Colors are
printed offset to
each other.
See page 1-4-34
Service Manual
Y116650-5