manualshive.com logo in svg

Olivetti d-Color MF220, Copy Operations, Page: 62 / 315

Share
Download
Olivetti d-Color MF220 Copy Operations Download Page 62

Proof Copy

4

4-20

d-Color MF360/280/220 (Version 3)

4.11

Using a preview image to check the copy result (Advanced Preview)

Check the finishing image of a copy in the 

Touch Panel

 before printing. This prevents copy errors from oc-

curring.

0

When you scan the original using the [Program Jobs] function, scan all originals, press [Finish], and then 
check the [Advanced Preview].

0

When you attempt to scan the original with an [Insert Image] specified, the machine scans the original 
first, and then the insert original. When this process is complete, you can check the [Advanced Pre-
view].

0

To use the [Book Copy] or [Booklet] function, no preview is available. Check the finishing state after 
printing.

0

If [Copy Guard] is detected, you cannot check finishing.

1

Load the original.

2

Select the desired copy settings.

3

Press the 

Proof Copy

 key.

4

Press [Preview on Screen] for the proof copy method and then select the original direction.

5

Press the 

Start

 key.

The Preview (View Status) screen appears.

6

Check the preview image.

%

To change the settings, press [View Pages]. Go to Step 7.

%

To start printing, press the 

Start

 key.

%

To scan another original, press [Finish], load the original, and then press the 

Start

 key.

7

Change the settings, and then press [View Status].

Settings

[

Prev.  Page]/

[Next Page

]

Switch from the current screen to either the previous or the next screen.

[Zoom]

Enlarge the preview image and check the details. Press [+] and [-] to 
change the zoom ratio from full size to 2, 4 or 8 times the normal size. To 
select a different area to be enlarged, touch the scroll bar arrows on the 
right and at the bottom side of the image.
The finishing state cannot be displayed if you change the display size.

[Rotate Image]

Rotate the preview image 180 degrees in order to correct the orientation of 
the original if necessary.
Pressing 

 rotates the currently displayed page.

Pressing [Rotate Pages] displays the Scanned Page List. Select the page 
to be rotated. Up to six scanned pages can be displayed. Press [

] or [

] 

to change the selection.

Summary of Contents for d-Color MF220




























































































































































































































































































































Reviews:

No comments