Olivetti d-Color MF220 Copy Operations Download Page 155

Page: 155 / 315

d-Color MF360/280/220 (Version 3)

7-7

7.1

[System Settings]

Press the

Utility/Counter

key

[Administrator Settings]

[System Settings]

[Daylight Saving

Time].

7.1.5

[Weekly Timer Settings]

Configure the weekly timer in order to allow you to turn on and off this machine at the specified date and time.

An exact date/time setting must be performed in advance.

Press the

Utility/Counter

key

[Administrator Settings]

[System Settings]

[Weekly Timer Set-

tings].

Settings

Configure whether to use daylight saving time and the time difference from UTC (Coordinate Universal
Time).

Factory default

[Daylight Saving Time]

[No]

Settings

[Weekly Timer ON/OFF
Settings]

Configure whether to use the weekly timer function.

[Time Settings]

Configure the time of each day of the week to turn on and off this machine.

[Set All]

The setting for the selected day of the week is ap-
plied to the same day of the week in other weeks.

[Delete]

Cancels the selected input value.

[Date Settings]

Configure the days when timer operation is activated individually. To can-
cel the setting, press the same day again.

[Daily Setting]

Configure the days of the week when the timer
operation is activated.

Summary of Contents for d-Color MF220




























































































































































































































































































































Search results

Summary of Contents for d-Color MF220

Reviews:

Related manuals for d-Color MF220

Brands by name

Popular brands

Olivetti d-Color MF220, Copy Operations

Search results

Summary of Contents for d-Color MF220

Reviews:

Related manuals for d-Color MF220

Brands by name

Popular brands