Olivetti d-Color MF2001 Service Manual Download Page 97

Page: 97 / 333

2KZ/2K0

1-3-59

U199

Displaying fuser heater temperature

Description

Displays the detected fuser temperature.

Purpose

To check the fuser temperature.

Method

1. Press the start key. The current setting is displayed.

Completion

Press the stop key. The screen for selecting a maintenance mode No. is displayed.

U201

Initializing the touch panel

Description

Automatically correct the positions of the X- and Y-axes of the touch panel.

Purpose

To automatically correct the display positions on the touch panel after it is replaced.

Method

1. Press the start key.

2. Select the [Initialize] or [Check].

Method: [Initialize]

1. Press the start key.

2. Press the center of the + keys. Be sure to press three + keys displayed in order.

The touch panel is adjusted automatically.

3. Press the indicated three + keys, and then check the display.

4. Press the stop key. The screen for selecting a maintenance item No. is displayed.

Method: [Check]

1. Press the start key.

2. Press the indicated three + keys, and then check the display.

When adjusting the display, press [Initialize] to execute the adjustment automatically.

3. Press the stop key. The screen for selecting a maintenance item No. is displayed.

Completion

Press the stop key. The screen for selecting a maintenance item No. is displayed.

Item No.

Description

Display

Description

Fix Press

Press roller center temperature (°C)

Fix Edge

Heat roller edge temperature (°C)

Fix Center

Heat roller center temperature (°C)

Display

Description

Initialize

Adjusts the display on the panel automatically

Check

Checks the display on the touch panel

Y113010-4

Sevice Manual

Summary of Contents for d-Color MF2001













































































































































































































































































































































Search results

Summary of Contents for d-Color MF2001

Reviews:

Olivetti d-Color MF2001, Service Manual, Page: 97 / 333

Search results

Summary of Contents for d-Color MF2001

Reviews: