Olivetti d-Color MF2001 Service Manual Download Page 93

Page: 93 / 333

2KZ/2K0

1-3-55

U150

Checking sensors for toner

Description

Displays the on-off status of each sensor or switch related to toner.

Purpose

To check if the sensors and switches operate correctly.

Method

1. Press the start key.

2. Select the item. The screen for executing each item is displayed.

Method: [T/C]

1. Turn each switch or sensor on and off manually to check the status.

When a switch or sensor is detected to be in the ON position, the display for that switch or

sensor will be “1”

2. To stop motor driving, press the stop key.

Method: [Waste Box]

1. Turn each switch or sensor on and off manually to check the status.

When a switch or sensor is detected to be in the ON position, the display for that switch or

sensor will be “1”

2. To stop motor driving, press the stop key.

Completion

Press the stop key. The screen for selecting a maintenance item No. is displayed.

Item No.

Description

Display

Description

T/C

Displays the state of the toner sensor.

Waste Box

Displays the state of the waste toner box.

Display

Switches and sensors

T/C Sensor 1st

Displays the state of the toner sensor (Yellow).

T/C Sensor 2nd

Displays the state of the toner sensor (Cyan).

T/C Sensor 3rd

Displays the state of the toner sensor (Magenta).

T/C Sensor 4th

Displays the state of the toner sensor (Black).

Motor

Drives developer motor, developer clutch.

Display

Switches and sensors

Waste Box Sensor

Displays the state of the waste toner box.

Motor

Drives developer motor, developer clutch.

Y113010-4

Sevice Manual

Summary of Contents for d-Color MF2001













































































































































































































































































































































Search results

Summary of Contents for d-Color MF2001

Reviews:

Olivetti d-Color MF2001, Service Manual, Page: 93 / 333

Search results

Summary of Contents for d-Color MF2001

Reviews: