Olivetti d-Color MF2001 Service Manual Download Page 58

Page: 58 / 333

2KZ/2K0

1-3-20

U032

Checking the operation of the clutches

Description

Turns each clutch on.

Purpose

To check the operation of each clutch.

Method

1. Press the start key.

2. Select the clutch to be operated.

3. Press the start key. The operation starts.

4. Press the stop key.

Completion

Press the stop key. The screen for selecting a maintenance item No. is displayed.

U033

Checking the operation of the solenoids

Description

Turns each solenoid on.

Purpose

To check the operation of each solenoid.

Method

1. Press the start key.

2. Select the solenoid to be operated.

3. Press the start key. The operation starts.

4. Press the stop key.

Completion

Press the stop key. The screen for selecting a maintenance item No. is displayed.

Item No.

Description

Display

Description

Feed

Paper feed clutch (PFCL) is turned on

Regist

Registration clutch (RCL) is turned on

Duplex

Duplex clutch (DUCL) is turned on

Middle

Middle clutch (MCL) is turned on

DLP

Developer stop clutch (DEVSCL) is turned on

Display

Description

MPT

MP solenoid (MPSOL) is turned on

Eject

Feedshift solenoid (FSSOL) is turned on

Service Manual Y113010-4

Summary of Contents for d-Color MF2001













































































































































































































































































































































Search results

Summary of Contents for d-Color MF2001

Reviews:

Olivetti d-Color MF2001, Service Manual, Page: 58 / 333

Search results

Summary of Contents for d-Color MF2001

Reviews: