Olivetti d-Color MF2001 Service Manual Download Page 52

Page: 52 / 333

2KZ/2K0

1-3-14

U002

Setting the factory default data

Description

Restores the machine conditions to the factory default settings.

Purpose

To move the mirror frame of the scanner to the position for transport

Method

1. Press the start key.

2. Select [Mode1(All)].

3. Press the start key.

The mirror frame of the scanner returns to the position for transport.

4. Turn the main power switch off and on.

* : An error code is displayed in case of an initialization error.

When errors occurred, turn main power switch off then on, and execute initialization using

maintenance item U002.

Error codes

Item No.

Description

Codes

Description

0001

Entity error

0002

Controller error

0020

Engine error

0040

Scanner error

Service Manual Y113010-4

Summary of Contents for d-Color MF2001













































































































































































































































































































































Search results

Summary of Contents for d-Color MF2001

Reviews:

Olivetti d-Color MF2001, Service Manual, Page: 52 / 333

Search results

Summary of Contents for d-Color MF2001

Reviews: