Olivetti d-Color MF2001 Service Manual Download Page 108

Page: 108 / 333

2KZ/2K0

1-3-70

U332

Setting the size conversion factor

Description

Sets the coefficient of nonstandard sizes in relation to the A4/Letter size. The coefficient set here

is used to convert the black ratio in relation to the A4/Letter size and to display the result in user

simulation.

Purpose

To set the coefficient for converting the black ratio for nonstandard sizes in relation to the A4/Let-

ter size.

Setting

1. Press the start key.

2. Select [Rate].

3. Change the setting using the cursor left/right keys or numeric keys.

4. Press the start key. The value is set.

Completion

Press the stop key. The screen for selecting a maintenance item No. is displayed.

U341

Specific paper feed location setting for printing function

Description

Sets a paper feed location specified for printer output.

Purpose

To use a paper feed location only for printer output.

A paper feed location specified for printer output cannot be used for copy output.

Method

1. Press the start key.

2. Select the paper feed location for the printer.

3. Select [On] or [Off] using the cursor left/right keys.

* : When an optional paper feed device is not installed, the corresponding count is not dis-

played.

4. Press the start key. The setting is set.

Completion

Press the stop key. The screen for selecting a maintenance item No. is displayed.

Item No.

Description

Display

Description

Setting range

Initial setting

Rate

Size parameter

0.1 to 3.0

1.0

Display

Description

Cassette1

Cassette 1

Cassette2

Cassette 2 (optional paper feeder)

Cassette3

Cassette 3 (optional paper feeder)

Service Manual Y113010-4

Summary of Contents for d-Color MF2001













































































































































































































































































































































Search results

Summary of Contents for d-Color MF2001

Reviews:

Olivetti d-Color MF2001, Service Manual, Page: 108 / 333

Search results

Summary of Contents for d-Color MF2001

Reviews: