Olivetti d-Color MF 4003, Service Manual

Page: 412 / 688

d-Color MF4003/MF3303
L TROUBLESHOOTING > 1. JAM CODE
L-14
Step Action Control signal Location of electrical component
2 Open and close the front door of the main body. - -
1.9.8 99-06
Contents
JAM type Controller JAM (print control on the main body is not completed)
JAM code 99-06
JAM detection timing 99-06 Print control is not completed even after a job has been completed.
Misfeed processing
location -
Relevant parts -
Procedure
Step Action Control signal Location of electrical component
1 Initial check items - -
2 Open and close the front door of the main body. - -
1.9.9 99-07
Contents
JAM type Controller JAM (main body not completing a job)
JAM code 99-07
JAM detection timing 99-07 The engine does not stop after a lapse of a given time after that a print has finished.
Misfeed processing
location -
Relevant parts -
Procedure
Step Action Control signal Location of electrical component
1 Initial check items - -
2 Open and close the front door of the main body. - -
Service Manual Y119930-3