Olivetti d-Color MF 4003, Service Manual

Page: 138 / 688

d-Color MF4003/MF3303
F DISASSEMBLY/REASSEMBLY > 4.
d-Color MF4003/MF3303
F-40
[2]
[1]
3. Remove two screws [1], and remove the plate [2].
[2]
[1] [3]
4. Remove the E-ring [1].
5. Disconnect the harness from the two holes [2], and remove the bypass tray
paper feed clutch [3].
6. To reinstall, reverse the order of removal.
4.5.2 Tray 1 paper feed clutch (CL3)
1. Remove the rear cover.
F.4.1.3 Rear cover
2. Open the right door.
3. Remove the IDC sensor assy.
F.4.7.1 IDC sensor (IDCS1)
4. Remove the paper feed unit.
F.4.2.6 Paper feed unit
[2]
[6] [3]
[1]
[4] [5]
5. Remove the harness from the wire saddle [1], and disconnect the connector
[2].
6. Remove the harness from the edge cover [3] and the harness guide [4].
7. Remove the E-ring [5], and remove the tray 1 paper feed clutch [6].
8. To reinstall, reverse the order of removal.
4.5.3 Registration clutch (CL4)
1. Remove the rear cover.
F.4.1.3 Rear cover
2. Open the right door.
3. Remove the IDC sensor assy.
F.4.7.1 IDC sensor (IDCS1)
4. Remove the paper feed unit.
F.4.2.6 Paper feed unit
[1]
[3] [2]
5. Remove the harness from the wire saddle [1] and the harness guide [2], and
disconnect the connector [3].
Service Manual Y119930-3