manualshive.com logo in svg

Olivetti d-Color 201MF, Theory Of Operation, Page: 81 / 120

Share
Download
Olivetti d-Color 201MF Theory Of Operation Download Page 81

15. Toner collecting section

Theory of Operation Ver. 1.0 Sep. 2008

74

bizhub C200

Composition/Operation

15.3 Operation

15.3.1

Toner collecting mechanism

• Toner collected by the cleaning blade of the transfer belt and waste toner in each of the 

imaging units are conveyed by the corresponding toner collecting screws to the waste 
toner box.

15.3.2

Waste toner box-in-position detection

• The waste toner full detection signal from the waste toner full sensor detects the waste 

toner box set in position. (See waste toner level detection mechanism for more informa-
tion.)

• The detection of the presence of the waste toner box is performed when the main power 

switch is turned ON and the front door is closed. The machine does not start printing 
when it detects that the waste toner box is not set in position.

A02ET2C543AA

IU toner collecting screw

Waste toner box

Transfer belt toner collecting screw

Theory of Operation                                          Y109670-2

Summary of Contents for d-Color 201MF

























































































































Reviews:

No comments