Olivetti d-Color 201MF Theory Of Operation Download Page 76 | Manualshive

Page: 76 / 120

Olivetti d-Color 201MF Theory Of Operation Download Page 76

Theory of Operation Ver. 1.0 Sep. 2008

14. Transfer corona section

69

bizhub C200

Composition/Operation

14.3.12

Pressure/retraction control during ACS mode

• The pressure/retraction of the 1st image transfer roller is controlled by the number of

multiple copies for the monochrome original during multi-copy cycle, so it promotes the
high productivity and extends the consumables’ life.

* ACS: Auto color selection
• The ACS mode does not function for the first copy and it functions for the second and

subsequent copies.

• The 1st image transfer roller/Y, M, C is pressed against the transfer belt when the roller is

in its default position.

A. General

• ACS control starts counting the number of multi-copies of the monochrome original when

switched from the color original to the monochrome original.

• When the number of multi-copies is as specified or under

: The monochrome printing will start with color mode. (with the 1st image transfer roller /

Y/M/C being pressed)
IU (Y/M/C) does not develop or transfer the image, but it rotates when the pressed
transfer belt rotates.
The transfer belt being pressed saves time since the 1st image transfer roller does not
need to be retracted.

• When the number of multi-copies is as specified or over.

: The monochrome printing will start when the color mode is complete and the 1st image

transfer roller /Y/M/C is retracted to be switched to the monochrome mode.
The transfer belt being retracted prevents IU to be wasted by useless rotation.

B. ACS control criteria

• Number of multiple copies of monochrome original when paper feed speed is 92 mm/s.

• Number of multiple copies of monochrome original when paper feed speed is 46 mm/s.

Paper length

Monochrome printing in color

mode

Monochrome printing after

switched to monochrome mode

457 mm or under

1 sheet

2 sheets or more

Over 457 mm

Switched to monochrome mode

Paper length

Monochrome printing in color

mode

Monochrome printing after

switched to monochrome mode

457 mm or under

1 sheet

2 sheets or more

over 457 mm

Switched to monochrome mode

Y109670-2 Theory of Operation

«
...
74
75
76
77
78
...
»

Summary of Contents for d-Color 201MF

























































































































Reviews:

No comments