Olivetti d-Color 201MF Theory Of Operation Download Page 69

Page: 69 / 120

14. Transfer corona section

Theory of Operation Ver. 1.0 Sep. 2008

bizhub C200

Composition/Operation

B. Pressure position changing mechanism

• To extend the service life of the PC drum/Y, M, C, the pressure position of the 1st image

transfer roller is changed between the monochrome mode and the color mode.

• The 1st image transfer roller/Y, M, C presses the transfer belt only in the color mode.
• The 1st image transfer roller/K presses the transfer belt in both the monochrome and

color mode.

Color mode:

• In the color mode, the 1st image transfer roller/Y, M, C is pressed against the transfer belt

and PC drum and the PC drum/Y, M, C is rotated.

Monochrome mode:

• In the monochrome mode, the 1st image transfer roller/Y, M, C is retracted, so that the

PC drum/Y, M, C remains stationary.

4038T2C162AB

Monochrome mode

Color mode

Transfer belt

1st image transfer roller /Y

PC drum/Y

4038T2C163AB

1st image transfer roller /M

1st image transfer roller /C

1st image transfer roller /K

PC drum/M

PC drum/C

PC drum/K

Theory of Operation Y109670-2

Summary of Contents for d-Color 201MF
























































































































Search results

Summary of Contents for d-Color 201MF

Reviews:

Olivetti d-Color 201MF, Theory Of Operation, Page: 69 / 120

Search results

Summary of Contents for d-Color 201MF

Reviews: