Olivetti d-Color 201MF Theory Of Operation Download Page 51

Page: 51 / 120

12. Developing section

Theory of Operation Ver. 1.0 Sep. 2008

bizhub C200

Composition/Operation

B. Developing section/Y, M, C drive mechanism

• Drive force from the color PC motor is transmitted to the color dev. unit engaged motor so

that the developing section/Y, M, C is driven.

• When the color dev. unit engaged motor starts running, the color dev. unit engaged gear

is engaged with the color dev. unit drive transmission gear and the drive force of the color
PC motor is transmitted to the developing section/Y, M, C.

• The state of the coupling operated by the color dev. unit engaged motor is detected by

the color dev. unit engaged position sensor.

A02ET2C523AA

A02FT2C056AA

Supply screws

Color PC motor (M2)

PC drum/Y

Color dev. unit engaged motor (M10)

Developing roller/M

PC drum/C

PC drum/M

Developing roller/C

Developing roller/Y

Color PC motor (M3)

Color dev. unit engaged motor (M4)

Developing drive coupling

Coupling released

Coupled

Color dev. unit
engaged gear

Color drive
transmission
gear

Developing section/Y, M, C

Theory of Operation Y109670-2

Summary of Contents for d-Color 201MF
























































































































Search results

Summary of Contents for d-Color 201MF

Reviews:

Olivetti d-Color 201MF, Theory Of Operation, Page: 51 / 120

Search results

Summary of Contents for d-Color 201MF

Reviews: