Oliver 4265C, Owner'S Manua, Page: 26 / 71

26 |
Page Oliver Machinery 4265C Jointer
Controls and Components
Control Panel
Key-Operated Main Switch
This switch enables access control to the jointer. To restrict access, lock the switch at the “OFF” position,
and the power will be cut off.
Stop Button with Emergency Reset
This stop button is equipped with an emergency shutoff feature. When it
is pressed, the machine will stop, and the stop button will need to be reset
before the machine can start again. To reset, simply rotate the serrated-
edge rim. The button will pop up when it is reset.
Start Button
When this machine is unlocked and the emergency stop button is reset, press START will start the machine.
Infeed Table Height Adjustment
The infeed table height adjustment handwheel is
located right below the control panel:
•
Turn CLOCKWISE to raise the table.
•
Turn ANITCLOCKWISE to lower the table.
•
The handle of the handwheel can be folded
down as needed.
The depth of cut scale next to the handwheel
indicates the position of the infeed table.