Oliver 4265C, Owner'S Manua, Page: 21 / 71

4265C Jointer OLIVERMACHINERY.NET
21 |
Page
Cleaning
To prevent rusting, the unpainted cast iron surfaces of this jointer are covered with machine oil and plastic
film.
Loosen the fence tilt lock [1] and use the handle [2] to raise the fence above the table. Lock the fence in
place. Release the fence position lock [3] , and move the fence all the way back. Remove the packaging
and wipe off machine oil with paper towels or rags.
After the initial cleaning, routinely coat the unpainted cast iron surface with rust preventive such as
Boeshield® T-9 or paste wax. Do not use rust preventives that contain silicone, which is known to interfere
with certain finishes and glues.