Oliver 4265C, Owner'S Manua, Page: 17 / 71

4265C Jointer OLIVERMACHINERY.NET
17 |
Page
Setup
Shop Preparation
Space Requirement
The dimensions of this machine are 88-1/2”(L) x
38(W). You will need additional spaces for
manipulating your workpiece, electrical
connection, and dust collection.
Load Limits
This machine has a shipping weight of 1055 lbs., and a net weight of 889 lbs. Please ensure all lifting tools
and building structures have adequate load capacity, for transporting and supporting the total weight of
this machine, the operator, and related items.
Electricals
Ensure a properly sized circuit and an electrical terminal are available nearby the machine. If the machine
is to be hardwired, there must be a readily accessible power disconnect nearby, so that the machine can
be disconnected from the power source for servicing and adjustments. If the machine is to be connected
with a cord and a plug, please ensure a matching outlet is installed nearby the machine.
Please refer to the previous chapter “Electricals” on page 15 for details regarding electrical requirements.
Lighting
Adequate lighting is needed for operating this machine. Overhead, non-glare lighting should be installed.
Safety Labels
If this machine introduces a new safety hazard to your workplace, display proper warning signs in a highly
visible location(s).
Dust Collection
Wood dust created by this jointer is a health hazard. Connect a dust collection system to this machine.
Check air suction regularly to ensure the pipes are not jammed.
Dust masks should be available for using the jointer.
CAUTION
Use a dust collection system that is rated above 700 CFM. Doing so improves air
quality in the workplace, and prevents the machine from jamming.
Piping of dust collection system introduces additional air resistance and decreases
the effective CFM measured at the dust ports. Ensure there is significant suction at
the dust port, so dust and debris can be effectively removed from the machine.