Oliver 2019, Owner'S Manual

Page: 7 / 56

2019 Lathe OLIVERMACHINERY.NET 7 | Page
Electricals
Input Power 230V, 1Ph, 60Hz
Full Load Current Rating 15A
Recommended Circuit Size 20A
Power Switch Type Button Switch
Plug Type NEMA 6-20
Cord Length & Type 6- 1/2’ SJT 12AWG Power cord
Variable Frequency Drive Type Delta ME300
Variable Frequency Drive Size 2.2kW / 3HP Output
Motor
Motor Type Three-phase variable speed TEFC induction motor
Horsepower 2 HP
Max Speed 3450 RPM
Efficiency
81.7%
Power Factor 80%
Power Transfer Mechanism Poly-V belt and pulleys
Bearing type Permanently sealed ball bearing
Lathe Capacity
Swing Over Bed 18 ”
Swing Over Banjo Base 14”
Outboard Swing 35-1/2 ”
Distance Between Centers
- Without Extension Bed
- With Extension Bed
26 ”
41 ”
Headstock and Spindle
Spindle Taper MT #2
Spindle Speed Range 50-950 (Low range)
170-3200 (High range)
Spindle Speed Indicator LCD
Spindle Direction Forward / Reverse
Floor to Spindle Center Height 41- 1/2”
Inboard Spindle Thread Size 1-1/4 x 8 TPI
Inboard Spindle Thread Direction Right Hand
Outboard Spindle Thread Size 1-1/4 x 8 TPI
Outboard Spindle Thread Direction Right hand
Drive Spindle Through Hole Size 5/8”
Spindle Bearings Type Permanently sealed bearings
Index Positions 36