Oliver 10047VS, Owner'S Manual, Page: 6 / 58

6 | Page Oliver Machinery 10047VS Shaper
Motor
Motor Type TEFC
Horsepower 3HP
Power Requirement 230V, 3Ph, 60Hz
Full Load Current Rating 9A
Speed 3450 RPM (Max)
Efficiency / Power Factor 81% / 88%
Power Transfer Mechanism Poly V-Belt and Pulleys
Bearing type Permanently Sealed Ball Bearing
Spindle and Cutter
Spindle Sizes 1-1/4” (Included)
1/2", 3/4”, 1" (Optional)
Spindle Speed 5,000-10,000 RPM, Reversible
Vertical Spindle Travel 4"
Max Cutter (Under Nut) Capacity: 1/2" Spindle
3/4” Spindle
1” Spindle
1-1/4” Spindle
2-3/4”
3-1/2”
3-1/2”
4”
Max Cutter Diameter 6-1/4” Below Table
7” Above Table
Table
Material Precision Ground Cast Iron
Table Dimensions 32-1/4“(W) x 26-3/4”(D)
Table Height 34-3/8”
Table Opening Diameter 6-1/4”
Number of Table Inserts 2
Table Insert Opening Diameter: 4-5/16”(Large)
2-1/2” (Small)
Miter Slot Type T-Slot (Standard Size)
Miter Slot Width 3/4”
Miter Slot Height 3/8”
Power feeder mounting locations On both rear corners of shaper table.