Olis CID-TS1-10-1 Instruction Manual Download Page 1

 

INSTRUCTION MANUAL 

IMPORTANT SAFETY INSTRUCTIONS 

 
When using electrical products, basic precautions should always be followed including the following: 
 
READ AND FOLLOW ALL SAFETY INSTRUCTIONS 

 

Do not use seasonal products outdoors unless rated suitable for outdoor use.  When products are used in outdoor applications, 

connect the product to a Ground Fault Circuit Interrupter (GFCI).  If one is not provided, contact a qualified electrician for proper 
installation. 

 

This seasonal use product is not intended for permanent installation or use. 

 

Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources of heat. 

 

Do not secure the wiring of this product with staples or nails or place on sharp hooks or nails. 

 

Do not let bulbs rest on the supply cord or on any wire. 

 

Unplug the product when leaving the house, retiring for the night or if left unattended. 

 

This is an electrical product – not a toy!  To avoid the risk of burns, personal injury and electric shock it should not be played with or 

placed where small children can reach it. 

 

Do not use this product for anything other than its intended use. 

 

Do not hang ornaments or other objects from the cord, wire or light string. 

 

Do not close doors or windows on the product or extension cords as this may damage the wire insulation. 

 

Do not cover the product with cloth, paper or any material not part of the product when in use. 

 

This product is equipped with non-shunted, non-replaceable LED lamps.  Do not twist or attempt to remove lamps. 

 

To reduce the risk of fire or electric shock, do not attempt to replace lamps or modify wiring or product. 

 

This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows, 

unplug the product from the outlet. Also unplug any additional strings or products that may be attached to the product. Replace the 
fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the product. If the replacement 
fuse blows, a short-circuit may be present and the product should be discarded. 

 

Read and follow all instructions that are on the product and provided with the product. 

 

Do not install on trees having needles, leaves or branch coverings of metal or materials which look like metal . 

 

Do not mount or support strings in a manner that can cut or damage the wire insulation. 

SAVE THESE INSTRUCTIONS

.

 

 

USE AND CARE INSTRUCTIONS 

 

Before using or reusing, inspect the product carefully.  Discard any products that have cut, damaged or frayed wire insulation or cords, 

cracks in the lamp holders or enclosures, loose connections or exposed copper wire.

 

 

When storing the product, carefully remove the product from wherever it was placed including trees, branches or bushes to avoid 

undue strain and stress on the product conductors, connections and wires.

 

 

When not in use, store neatly in a cool, dry location protected from sunlight.

 

 

When the product is used on a live tree, the tree should be well maintained and fresh.  Do not place on live trees with brown needles 

or that break off easily.  Keep the tree holder filled with water.

 

 

If the product is placed on a tree, the tree should be well secured and stable.

 

User Servicing Instructions 
 
To Replace a Fuse 
 

Risk of Fire. Do not replace attachment plug. Contains a safety device (fuse) that shall not be removed. Discard product if attachment plug is 
damaged. Disconnect power before replacing the fuse. 
 

 

Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord. 

 

The method of opening the fuse cover. Open fuse cover by sliding the fuse cover towards the blades of the attachment plug, or other 

product appropriate. 

 

Turn the fuse holder over or to push on the fuse for removal or other product appropriate. 

 

Close fuse cover by sliding the fuse cover on the attachment plug or other product appropriate. 

 

Risk of fire. Replace fuse only with 3 Amp, 125 Volt fuse. 

Connecting Sets End to End

 

 

When multiple products are connected together,do not exceed the lowest of the indicated maximum 
wattage on the cord near connected product’s receptacle. 

CAUTION! TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK: 

 

CAUTION: This is an electric product — not a toy! To avoid risk of fire, burns, personal injury and electric shock it should not be 
played with  or placed where small children can reach it. 

 

CAUTION: To reduce the likelihood of excessive heat and possible damage, use only decorative lamp accessories packaged with 
this product or marked for use with this product 

 

CAUTION – Do not overload. This product is rated 2.4 Watts, Connect other decorative lighting products of the same type end-to-end 
up to a maximum of 216 Watts total. 

 

Do not place near standing areas of water, such as ponds and pools. 

 

An LED light by its nature will have some colour variance within the same colour family. 
For multiple connected Color Wave colour-changing sets (if applicable), if uniform changing is desired connect sets end to end first prior to 
plugging into power outlet. Some variance in the color change from set to set may occur over time. 
 

 

 

CSA: 223812 Indoor Use Only   

 

 

CSA: 223812 Outdoor Use 

Model CID-TS1-10-1:  120 VAC, 0.02 A                                                  Model COD-TS1-10-1:  120 VAC, 0.02 A 
Model CID-TS1-20-1:  120 VAC, 0.02 A                                                  Model COD-TS1-20-1:  120 VAC, 0.02 A 

Reviews: