10
H
eat
D
etector
tI 150
Installation With an Alarm System
Registering heat detectors on an alarm system
One of the heat detectors must be registered as the main device on an alarm system
from the Protect or ProHome series.
The main device should be installed centrally and in transmission range to the alarm
system.
Warning
! Hearing damage through loud alarm signal! The
alarm signal is loud and could cause hearing damage. Do
not test the product close to your ears. Use appropriate
ear protectors when connecting the heat detectors.
1
Select the
Register
menu option on the alarm system.
2
Insert two appropriate batteries in the battery compartment (2) of one of the heat
detectors (main device). Pay attention that the batteries are inserted the right way
around.
3
The base unit display indicates that registration has been completed successfully
on the alarm system and the heat detector issues an acoustic signal to confirm the
process.
4
Connect more heat detectors to the main device (refer to Connecting heat detectors
without an alarm system on page 9).
Complete a function test following registration! Press the Test button (5). The function of
the alarm signal, signal LED and, if necessary, connected devices are tested.
