Olimpia splendid Unico Air R410A, Instructions For Use And Maintanence

Page: 88 / 489

EN - 40
ENGLISH
External exchanger temperature probe
failure (short circuit) (TFS5)
ON * ON * ON * OFF
External exchanger temperature probe
failure (open circuit) (TFS6)
ON * ON * ON * ON *
ON : led on - OFF: led off - *: Flashing
4.3.4 - Anomalies and remedies
Malfunctioning Cause What must be done?
The unit will not start. Current failure Wait for the current to be
restored.
The unit is disconnected
from the current.
Check that the plug is
inserted in the wall socket.
The switch (8) is set to “ 0 ”
position
Set the switch (8) to “ I ”
The fuse is interrupted
or the thermal-magnetic
circuit breaker has tripped.
Replace the fuse or restore
the thermal-magnetic cir-
cuit breaker.
The remote control bat-
teries may be discharged.
Replace the batteries.
The time set with the timer
may not be correct.
Wait or annul the timer
setting.
The appliance doesn’t
cool/heat sufficiently
anymore.
Incorrect temperature
setting.
Set the temperature cor-
rectly. Consul the "Using
the remote control" chapter
for the procedure.
The air filter is dirty. Clean the air filter.
The doors or windows are
open.
Close the doors or win-
dows.
The air inlet or outlet vents
of the indoor or outdoor
units are blocked.
First, remove the obstruc-
tions and then re-start
the unit.
If the problem has not been solved, please contact the nearest technical
assistance service.
Please give detailed information about the malfunction and on the equip-
ment version.