Olimpia splendid Bi2 WALL TR 1000, Instructions For Use And Maintenance Manual, Page: 76 / 449

FAN SPEED
LED
MODE
SWING
NIGHT
ON OFF SET
°F
°C
A
ON
OFF
h
B1
B9
B8
B5
B2
B6
B3
B11
B4
B10
B7
18
EN - 28
ENGLISH
7.3 - REMOTE CONTROL KEYS
(Fig.18)
• B1 : ON/Standby
• B2 : Operating mode selection (cooling =>
fan => heating)
• B3 : Flap position selection (only models with
Flap)
• B4 : Increase temperature
• B5 : Decrease temperature
• B6 : Fan speed selection (max speed =>
medium speed => min speed => auto….)
• B7 : LED
• B8 : Unit programmed switching on setting
• B9 : Unit programmed switching off setting
• B10 : Unit programmed switching on/off con-
firmation/cancellation
• B11 : Night mode selection (on/off)
7.4 - USE OF THE REMOTE CONTROL
The remote control provided with the appliance is the
tool which allows You to use the equipment in the
most comfortable manner. It should be handled with
care and in particular:
• Keep it dry (do not clean it with water or leave it
outdoors in bad weather).
• Avoid dropping or bumping it.
• Keep it out of direct sunlight.
• The remote control operates by means of an infrared beam.
• During use, do not interpose obstacles between the remote
control and the appliance.
• If other appliances in the room have remote controls (TV, stereo,
etc...), there may be interference with consequent loss of the
sent signal.
• Electronic and fluorescent lamps may interfere in the transmis -
sions between remote control and appliance.
• Remove the batteries in case of prolonged disuse of the remote
control.