Olimpia splendid Bi2 WALL AR 1000, Instructions For Use And Maintenance Manual, Page: 60 / 317

EN - 24
ENGLISH
When the unit is configured for remote control, the air probe in -
stalled on board of the fan coil is ignored.
6 - OPERATING CONDITIONS
For safe and effective operation, use the appliance at the following temperatures.
Mode Water inlet temperature
Cooling 3°C
~
20°C
Heating mode 30°C
~
70°C
• If the appliance is not used within the values indicated, operating
anomalies may occur.
• It is normal that condensate forms on the surface of the appliance
when the level of humidity in the room is high; in this case, close
doors and windows.
• Operating pressure of the hydraulic system: Max: 10 bar - Min:
1,5 bar
7 - OPERATING MODE SETTINGS
It is possible to manage and set the various operating modes of the appliance through
the remote control and the App.
For further information, please consult the respective manuals.
8 - MAINTENANCE AND CLEANING
Always make sure the appliance has been disconnected electrically
before proceeding with any maintenance or cleaning intervention.
Do not touch the metal parts of the appliance when you remove
the filter.
There is a risk of injury due to the sharp metal edges.
Do not use water to clean the internal parts of the air conditioner.
Exposure to water can ruin the isolation, with the risk of electric
shocks.