Olicom Ethernet MCA 10/100 Adapter Manual To Operations Download Page 41

Page: 41 / 88

Ethernet MCA 10/100 Adapter v. 1.0, P/N: 710001414

Software Installation

NetWare Client 32 for Windows 3.1x

This installation requires:

•

Novell NetWare Client 32 for DOS/Windows 3.1x installation diskettes

•

Olicom Driver Disk

NetWare Client 32 version 2.12

1. Run the install program on the NetWare Client 32 for DOS/Windows 3.1x

installation diskettes and follow the installation guidelines given by Novell.
See the Novell installation guide for details.

2. When prompted for Network Board drivers, select “USER SUPPLIED

DRIVER”.

3. Insert the Olicom Driver Disk and specify the path to the Olicom NetWare

Client 32 drivers:

A:\NETWARE\NW4X\OCE3XODI.LAN

4. Select “Olicom Ethernet MCA 10/100 Adapter (OC-2335)” driver and follow

the instructions to complete the installation.

NetWare Client 32 version 2.20

1. Run the install program on the NetWare Client 32 for DOS/Windows 3.1x

installation diskettes and follow the installation guidelines given by Novell.
See the Novell installation guide for details.

2. When prompted for LAN adapter, select “Have Disk”.

3. Insert the Olicom Driver Disk and specify the path to the Olicom NetWare

Client 32 drivers:

A:\NETWARE\NW4X\

4. Select the manufacturer “Olicom” and the model “Olicom Ethernet MCA

10/100 Adapter (OC-2335) (Have Disk)”, and follow the instructions to
complete the installation.

Summary of Contents for Ethernet MCA 10/100 Adapter

























































































Search results

Summary of Contents for Ethernet MCA 10/100 Adapter

Reviews:

Related manuals for Ethernet MCA 10/100 Adapter

Brands by name

Popular brands

Olicom Ethernet MCA 10/100 Adapter, Manual To Operations

Search results

Summary of Contents for Ethernet MCA 10/100 Adapter

Reviews:

Related manuals for Ethernet MCA 10/100 Adapter

Brands by name

Popular brands