Olicom Ethernet MCA 10/100 Adapter, Manual To Operations

Page: 33 / 88

26
Ethernet MCA 10/100 Adapter v. 1.0, P/N: 710001414 Software Installation
13. Add additional network drivers and/or protocols in the “Network Drivers”
panel.
14. Click the “Close” button when done.
15. To share files and/or printers, change the settings in the “Sharing” panel by
clicking the “Sharing...” button. Click “OK” to return from the “Sharing”
panel.
16. Click the “OK” button when done.
17. If the network is being installed for the first time, enter a user name,
workgroup name and a computer name. Make sure the computer name is
unique throughout the network. Click “OK” when done.
18. Setup may require some additional files from the Windows for Workgroups
3.11 distribution disks. Insert these when prompted.
19. Windows for Workgroups 3.11 automatically changes the CONFIG.SYS,
AUTOEXEC.BAT, SYSTEM.INI and PROTOCOL.INI files if necessary.
Click “OK” to confirm these changes.
20. Select “Restart Computer” to make the changes take effect. Remember to save
any un-saved information before restarting the system.
Adapter Parameters
To view or change the adapter parameter settings for the Olicom driver, do the
following:
1. Select the “Network Setup” icon from the Network Window.
2. Select the “Drivers...” button.
3. Highlight the adapter you wish to review.
4. Click the “Setup...” button.
5. Click the “Advanced...” button.
6. Highlight the adapter parameter you wish to review. The value is displayed in
the box below the “Advanced Network Adapter Settings” box.
7. To change a setting, enter the new value in the “Value” field for the proper
parameter.
8. Click the “Set” button to accept the setting.
9. When all parameters have been set correctly, click the “OK” button. Click the
“OK” button in the “Olicom Ethernet MCA 10/100 Adapter (OC-2335)” panel
to return to the “Network Drivers” panel.
10. Click “Close” to exit the drivers panel.