Olicom CrossFire 8600, Manual To Operations

Page: 210 / 250

194
CrossFire 8600/8605 Token-Ring Switches v. 1.2, P/N: 710001641 Monitoring Port Traffic
The following information is displayed on this screen:
Port Number
Port to which the network analyzer or RMON probe will be attached.
➽
Note: This port should be assigned to its own TrCRF. For information about
assigning ports to a TrCRF, see “VLAN Configuration” on page 87.
Port To Monitor
The port that will be monitored.
➽
Note: It is only possible to monitor ports within a physical switch, and not in a
stack.
❏
To Select Then
Change the current
settings… The appropriate
parameter… Specify the value.
Disable the Switched
Port Analyzer port… Port to Monitor Specify 0.
Save your changes… Return
Table 22. Changing and Saving Switched Port Analyzer Settings