Page 61
11.
Certifications
11.1.
CE accreditation
WinPro
®
/ MX62 complies with the basic safety requirements of the following
European directives (see also chapter 12).
ATEX Directive (94/9/EC):
The gas detection system is approved for measurements in explosive areas for
safety functions using certified detectors as TBGW EX. The corresponding EC
type examination certificate is:
BVS 03 ATEX G 002 X
For details, certified applications and special conditions of safe use please refer
to chapters 11.2 and 11.3.
EMC Directive (2004/108/EC):
The unit has passed EMC testing according to EN 50270 and can be installed in
domestic and industrial areas with regards to generic emission and immunity.
Low Voltage Directive (2006/95/EC):
The system is in compliance with EN 61010-1 Part 1, Safety regulations for
electric measuring, control and laboratory equipment.
11.2.
Performance approvals
WinPro
®
/ MX62 is approved by DEKRA EXAM according to EN 60079-29-1
(combustible gases), EN 50104 (oxygen), EN 45544-1 / -2 (toxic gases) and EN
50271 (digital technique).
The corresponding performance approval certificates are:
BVS 03 ATEX G 002 X
and
PFG 41300402
Performance approval include the following detection ranges:
0-20% LEL
0-100% LEL
0-100 %vol. CH
4
0-100 %vol. CO
2
0-10 %vol. O
2
21-0 %vol. O
2
Summary of Contents for MX62
